In the kit

• BOLT GUIDE
• 2 COMPLETE DETENTS
• BOLT GUIDE CAP
• FEEDNECK LEVER

NDZ MINI replacement velocity back caps add some bling. With little aftermarket parts, one mini looks pretty much just like the other. Replace your stock damaged or worn cap with a fresh one.  

• custom spinner design
• take the old one out, new one in. Its that easy. 

Unmatched speed and reliability. Roller bearings provide that smooth consistency every player is looking for. Increase your firing rate and start making a difference for your team today.

Unmatched speed and reliability. Roller bearings provide that smooth consistency every player is looking for. Increase your firing rate and start making a difference for your team today.

Features:

• 1  #24 BOLT TIP
• 2  #25 LRG BOLT GUIDE O-RING
• 3  #28 SM BOLT GUIDE O-RING
• 3  #30 BOLT GUIDE O-RING
• 1  #35 POPPET O-RING
• 1  #32 BOLT GUIDE CAP O-RING
• 1  #17 SOLENOID OUTER O-RING
• 1  #16 SOLENOID INNER O-RING
• 1  #47 AIR TRANSFER TUBE TOP MALE O-RING
• 1  #48 AIR TRANSFER TUBE BOTTOM MALE O-RING
•  1 # 50 AIR TRANSFER TUBE FEMALE BOTTOM O-RING

Boss Grips for your Mini.

Tadao's hot software now available for your Invert Mini!

Fully functional in the Empire Invert Mini
Based on the Musashi 7 software
New model microcontroller runs at 8 Mhz for no hardware lag and the fastest code execution
Enhanced power switching hardware for the solenoid
Includes 12 fire modes:
*uncapped semi-auto
*capped semi-auto
*PSP auto-response
*PSP 50% ramping
*PSP 100% ramping
*PSP burst
*NXL full-automatic
*auto-response
*50% ramping
*100% ramping
*3 round burst
*full-automatic
Aynchronously monitors the trigger switch, using an interrupt based scan at 2 million times per second
G mode setting allows 3 different options for every fire mode, giving 36 different ?breakout? style modes
Adjustable ABS programming prevents first shot drop-off
AMB (anti-mechanical bounce) and CPF (cycle percentage filter) algorithms help to eliminate mechanical bounce and switch bounce
Power efficient software and hardware lengthens battery life
Programming mode allows changes to debounce, dwell, loader delay, AMB, ABS dwell, fire mode, fire mode max rate of fire, eye mode, CPF, ramp start, G mode, bolt delay, and training mode dwell
All settings are stored in non-volatile memory so they are not lost when battery is disconnected
One-touch startup enables the marker to fire instantly
Automatic 15-minute idle power down saves batteries
4 eye modes: delayed, forced with force shot, test mode with rate of fire indicator, and reduced dwell training mode with rate of fire indicator
Low battery indicator hardware and software shows battery level each time the marker is turned on

• Key Features

  • Two new modes! Select-A-Mode & Training Mode
  • Compatible with the Mini.
  • Simple trigger programming
  • 9 fully adjustable base modes, w/ thousands of ramp modes
  • Wireless Hopper Transmission Port - Pulse RF adapter compatible & future Virtue wireless upgrade ready
  • Fully adjustable, unlimited, Max Rate of Fire
  • 15 BPS Ready
  • 100% tournament legal (NPPL, PSP, NXL, CFOA, Millennium)
  • Advanced Virtue Eye & Trigger Logic
  • Adjustable debounce & mechanical bounce (AMB)
  • Adjustable dwell, closing dwell, eye sensitivity, anti-bolt stick & more
  • Adjustable Ramp Activation Speed and Ramp Percentage
  • Low battery indicator and power efficient software
  • Forced shot
  • Brighter multicolor LED
  • Instant on with power saving 10 minute idle auto shutoff
  • Lifetime warranty & lifetime software upgrades

   

Features:

• 5 Bottom Section (Air Transfer Tube) O-rings
• 2 Regulator OPP complete
• 2 Regulator pin valve opener
• 2 Regulator filter
• 2 Regulator adj screw
• 3 feed collar
• 15 Top Section (Air Transfer Tube) O-rings
• 5 Air transfer tube o-ring female bottom
• 10 Poppet Urathane O-rings
• 5 Bolt Guide cap O-rings
• 12 Bolt guide o-ring small front
• 16 Bolt guide o-ring large
• 5 Solenoid Internal O-ring
• 5 Bolt Tip O-ring
• 2 Bolt complete w/o-rings
• 2 Main spring
• 10 Check Valves
• 4 Poppet
• 4 Battery Wiring Harness
• 5 Air Transfer Plate Manifold Gasket
• 5 Solenoid Front O-rings
• 5 Solenoid Outer O-rings
• 2 Solenoid piston
• 6 Solenoid screw
• 10 Front Cap Locking Screws
• 10 Complete Detent Assemblies
• 6 Grip Cover Screws
• 5 Rear Grip Frame Mounting Screw
• 5 Front Grip Frame Mounting Screw
• 5 Trigger set screw short
• 5 Trigger set screw long
• 5 Trigger set screw w/magnet
• 2 Trigger Mounting Pin
• 6 Regulator mount screw
• 5 Feedneck screw
• 10 Foregrip  Screws
• 10 Foregrip rail retention screw
• 20 Air Transfer Plate Screws
   

Features:

• 2 Bottom Section (Air Transfer Tube) O-rings
  4 Top Section (Air Transfer Tube) O-rings
  2 Poppet Urathane O-rings
  4 Bolt Guide O-rings
  2 Solenoid Internal O-rings
  1 Bolt Tip O-ring
  3 Check Valves
  1 Poppet
  1 Battery Wiring Harness
  1 Air Transfer Plate Manifold Gasket
  2 Solenoid Front O-rings
  2 Solenoid Outer O-rings
  2 Bolt O-rings
  2 Front Cap Locking Screws
  2 Complete Detent Assemblies
  2 Grip Cover Screws
  1 Rear Grip Frame Mounting Screw
  1 Front Grip Frame Mounting Screw
  2 Post Travel Adjustment Screws
  3 HES Adjustment Screws
  1 Trigger Mounting Pin
  2 Rail Locking Screws
  1 Locking Lever Screw
  4 Air Transfer Plate Screws
  2 Main Circuit Board Attachment Screws
  2 Fore Grip Set Screws
   

Clamping feed neck that will fit the Invert Mini.

Ultra fast, ultra smooth, quick lever. All aircraft quality, 6061 aluminum with a machined Delrin back stop, for the lever action camloc.

Get it close with the adjustment knob then flip the lever into place. It doesn't get a lot easier or faster than that.

Need to remove your hopper? Flip it open, the lever will remain in place so all you've got to do is push it closed, not fumble around trying to get it lined up.

Built strong, built to last, 100% made in America/Guaranteed for life.

MINI GRIP FRAME BLACK

MINI GRIP FRAME BLACK

MINI GRIP FRAME BLACK

FOREGRIP

FOREGRIP

FOREGRIP

FOREGRIP SIDE PLATE